| Loop Power Supplies |
|---|
Click on model numbers below for product data sheets
|
Reference Info
Ground Loops 
|
| Model |
Input |
Output |
Features |
|
API 9046
Regulated DC Power Supply |
Factory configured for
115 VAC (standard) or
230 VAC power (A230 option)
|
Specify output voltage
Factory configured
Others available
9046-05 0-5V 250mA
9046-06 0-6V 200mA
9046-09 0-9V 150mA
9046-10 0-10V 140mA
9046-12 0-12V 125mA
9046-15 0-15V 100mA
9046-18 0-18V 85mA
9046-24 0-24V 75mA
9046-28 0-28V 60mA
9046-32 0-32V 50mA
|
- Hot-swappable plug-in design
- Lifetime warranty
- Power LED
- Regulated output
- Output fine adjustment
- Uses API-008 8-pin socket
- Specify power, 115 VAC or 230 VAC
|
 |
API 9046 CH
Regulated Bipolar DC Power Supply
|
Factory configured for
115 VAC (standard) or
230 VAC power (A230 option)
|
Specify output voltage
Factory configured
Others available
9046 CH-05 ±5V 125mA
9046 CH-06 ±6V 100mA
9046 CH-12 ±12V 60mA
9046 CH-15 ±15V 50mA |
- Hot-swappable plug-in design
- Lifetime warranty
- Power LED
- Regulated output
- Output fine adjustment
- Uses API-008 8-pin socket
- Specify power, 115 VAC or 230 VAC
|
Sineax B 812
Loop Power Supply with I/O Isolation and Hart
|
Factory configured for
60-265 VAC or VDC power |
Input side; 4-20 mA,
18 to 25.5 VDC
Source resistance
330 Ω
Output side; 4-20 mA, 17 VDC no load
Permitted load: 750 Ω, 550 Ω with HART
|
- 3.6 kV input, output, and power isolation
- Red LED for open and short circuit fault detection
- Designed for HART protocol
- Specify power, 60-265 VAC/VDC or 20-70 VAC/VDC
Specifications
Instructions |
 |
Sineax B 812
Loop Power Supply with I/O Isolation and Hart |
Factory configured for
20-70 VAC or VDC power |
Input side; 4-20 mA,
18 to 25.5 VDC
Source resistance 330 Ω
Output side; 4-20 mA, 17 VDC no load
Permitted load: 750 Ω, 550 Ω with HART |
Sineax B 840
4 Channel Loop Power Supply
|
Factory configured for
24 VAC,
115 VAC, or 230 VAC power |
4-20 mA, 24 VDC
4 independent 4-20 mA Loops |
- 4 channels, 4-20 mA, 24V DC
- LED monitor for each channel
- Each channel isolated
- 30 mA current limiter for each channel
- Specify power, 24 VAC, 115 VAC, or 230 VAC
Specifications
Instructions |
 |
