| Signal Conditioner Accessories: Sockets, Shunts, DIN Rail |
Accessories pdf with all products on this page
Click on model numbers below for data sheet and application information |
| Accessories |
Description |
|
|
API 008 |
8-Pin Socket, DIN Rail or Surface Mount |
 |
|
API 008 FS |
8-Pin Socket, Finger-Safe, DIN Rail or Surface Mount |
|
API 011 |
11-Pin Socket, DIN rail or Surface Mount |
|
API 011 FS |
11-Pin Socket, Finger-Safe, DIN Rail or Surface Mount |
|
API TK36 |
Aluminum DIN Rail, 39" Long |
|
API CLP1 |
Hold-Down Spring for API-008 or API-011 |
Hold Down Spring |
Current Shunt |
|
API 008-5A |
8-Pin Socket, DIN Rail or Surface Mount, with 5 A Current Shunt, 0.1 Ohm, 1%, 25W |
|
API 011-5A |
11-Pin Socket, DIN or Surface Mount, with 5 A Current Shunt 0.1 Ohm, 1%, 25W |
| Signal Conditioner Options |
| Power |
Specify Power on Order |
|
Standard |
Isolated 115 VAC Power Supply - Standard Where Applicable |
|
A230 |
Isolated 230 VAC Power Supply |
|
A12 |
Isolated 12 VAC Power Supply (see price list) |
|
A24 |
Isolated 24 VAC Power Supply (see price list) |
|
D |
Isolated 9-30 VDC Power Supply (see price list) |
| Alarm |
Add Option Code to End of Module Model Number
|
|
A |
Adjustable Deadbands on Dual Alarms (see price list) |
|
HT |
Latching Alarm with Pushbutton Reset for Modules with Single Alarm (see price list) |
|
HP |
Latching Alarm with Power-Off Reset for Modules with Single Alarm (see price list) |
|
R |
Reverse-Acting Alarms (Non-Failsafe) (see price list) |
|
L |
Low Trip for Single Alarm Modules (Trip on Decreasing Signal) |
|
HH |
High/High Trip for Dual Alarm Modules instead of High/Low |
|
LL |
Low/Low Trip for Dual Alarm Modules instead of High/Low Standard |
| Module |
Add Option Code to End of Module Model Number |
|
B |
Downscale Burnout on Thermocouple Modules (Upscale Standard) (see price list) |
|
DF |
Fast Response Time, Available on Many Models, Consult Factory (see price list) |
|
U |
Conformal Coating for Moisture Resistance (see price list) |
