Potentiometer to DC Signal Conditioners, Converters, Isolators, Transmitters, Alarms  Click on model number to open product data sheet pdf
|
Lifetime warranty on API modules
Click on model numbers below for product data sheets
|
LoopTracker® LEDs
Easy Plug-In Design
Output Test
Hot-Swappable |
|
| Model |
Input |
Output |
Features |
|
APD 1800
Potentiometer Input
Single Alarm Trip
|
Any full-range potentiometer
0-100 Ω to
0-1 Mega Ω
|
Dual 8A SPDT contact sets
One field adjustable setpoint potentiometer
One field adjustable deadband potentiometer
Standard: HI alarm, non-latching, normal acting
Specify alarm options
LO alarm
Latching with push button reset
Latchig with power off reset
Reverse acting
|
- Lifetime warranty
- DIN rail mount without tools
- Full I/O/power isolation
- LoopTracker LED for input
- Alarm status LEDs
- Push to test/reset
- Remote push to test/reset
- Universal power 60-265 VAC, 85-300 VDC
- D option for 9-30 VDC, 10-32 VAC power
|
|
APD 1820
Potentiometer Input
Dual Alarm Trip
|
2 independent 8A SPDT contact sets
Two field adjustable setpoint potentiometers
Two field adjustable deadband potentiometers
Standard: HI-LO alarms, non-latching, normal acting
Specify alarm options
HI-HI alarm
LO-LO alarm
LO-HI alarm
Latching with push button reset
Latchig with power off reset
Reverse acting
|
APD 1830
Potentiometer Input
Band Alarm Trip
|
Two 8A SPDT contact sets
Two field adjustable setpoint potentiometers
Two field adjustable deadband potentiometers
Standard: Band alarm (both alarms trip if outside LO and HI trip points), non-latching, normal acting
Specify alarm options
Inverse band alarm
Latching with push button reset
Latchig with power off reset
Reverse acting
|
API 4003 G I
Isolated Potentiometer to DC Transmitter |
Any Full-Range Potentiometer
0-100 Ω to
0-1 Mega Ω
|
Specify output range
Factory configured
Others available
0-1 V
0-5 V
1-5 V
0-10 V
±5 V
±10 V
0-20 mA
4-20 mA
|
- Hot-swappable plug-in design
- Direct replacement for Action AP 4003
- I/O LoopTracker LEDs
- Output test button
- Full I/O/power isolation
- Uses API-008 8-pin socket
- 115 VAC powered
- A230 option for 230 VAC
- P option for 60-265 VAC, 85-300 VDC power
- D option for 9-30 VDC power
|
|
APD 4003
Isolated Potentiometer to DC Transmitter |
Any Full-Range Potentiometer
0-100 Ω to
0-1 Mega Ω
|
Specify output range
Factory configured
Popular ranges, others available
0-1 V
0-5 V
1-5 V
0-10 V
±5 V
±10 V
0-20 mA
4-20 mA
|
- Removable plugs
- I/O LoopTracker LEDs
- Output test button
- Full I/O/power isolation
- Selectable output sink/source
- 20 V output loop power supply
- Universal power 60-265 VAC, 85-300 VDC
- D option for 9-30 VDC, 10-32 VAC power
|
|
API 4008 G
Field Selectable Minuteman Setup
Isolated Potentiometer to DC Transmitter
|
Any full-range potentiometer
0-100 Ω to
0-1 Mega Ω
|
18 field configurable outputs
0-1 V to ±10 V
0-2 mA to 0-20 mA
4-20 mA
|
- Minuteman one-minute setup
- Hot-swappable plug-in design
- I/O LoopTracker LEDs
- Output test button
- Full I/O/power isolation
- Uses API-008 8-pin socket
- 115 VAC powered
- A230 option for 230 VAC
- P option for 60-265 VAC, 85-300 VDC power
- D option for 9-30 VDC power
|
|
APD 4008
Field Selectable Minuteman Setup
Isolated Potentiometer to DC Transmitter
|
Any potentiometer
0-100 Ω to
0-1 Mega Ω
0 to 90% offset capable
Can use partial potentiometer ranges
|
18 field configurable outputs
0-1 V to ±10 V
0-2 mA to 0-20 mA
4-20 mA
|
- Minuteman one-minute setup
- Removable plugs
- I/O LoopTracker LEDs
- Output test button
- Full I/O/power isolation
- Selectable output sink/source
- 20 V output loop power supply
- Universal power 60-265 VAC, 85-300 VDC
- D option for 9-30 VDC, 10-32 VAC power
|
|
| Documents for Discontinued Products |
| API 1800G
|
Potentiometer Input Single Alarm Trip. Call factory for replacement.
|
|
API 1820 G
|
Potentiometer Input Dual Alarm Trip. Call factory for replacement.
|
|
API 4003 G
|
Potentiometer to DC Transmitter, Non-isolated. Use API 4003 G I
|
Contact Us