| Strain Gauge, Bridge & Load Cell Signal Conditioners and Transmitters |
Download pdf with all products on this page
Bridge (Strain Gauge) Input Transmitters
Click on model numbers below for data sheets and application information |
LoopTracker® LEDs
Output Test Button
Lifetime Warranty |
Reference Info
Alarm Terminology
Deadband
Relay Protection & EMI Suppression
Troubleshooting Strain Gauge Type Sensors |
| Model |
Input |
Output |
Features |
|
API 4051 G
Bridge to DC Transmitter |
Specify Input Range
Factory Configured
Others Available
1 mV/V
2 mV/V
3 mV/V
5 mV/V
10 mV/V
20 mV/V
50 mV/V
100 mV/V
200 mV/V
Specify Excitation Voltage 4-10 VDC |
Specify Output Range
Factory Configured
Others available
0-1 V
0-5 V
1-5 V
0-10 V
±5 V
±10 V
0-20 mA
4-20 mA |
- LoopTracker LEDs for Input and Output
- Direct Replacement for Action AP 4051
- Internal Bridge Excitation Source
- Output Test Button
- Uses API-011 11-Pin Socket
- 115 VAC Powered
- A230 option for 230 VAC Power
- D option for 9-30 VDC Power (+$60)
|
 |
API 4058 G
Field Selectable Minuteman Setup
Bridge to DC Transmitter |
Field Configurable
0-5 mVDC to
0-1200 mVDCField Settable Excitation Voltage
0-10 VDC in 1 VDC steps |
18 Field Configurable Outputs
0-1 V to ±10 V
0-2 mA to 0-20 mA
4-20 mA |
- Minuteman One-Minute Setup
- I/O LoopTracker LEDs
- Internal Bridge Excitation Source
- Drive up to 4 bridges
- Output Test Button
- Uses API-011 11-Pin Socket
- 115 VAC Powered
- A230 option for 230 VAC Power
- D option for 9-30 VDC Power (+$60)
|
 |
API 4059 G
Field Selectable Minuteman Setup
Isolated Bridge to DC Transmitter |
Field Configurable
0-5mVDC to
0-400mVDC
Field Settable Excitation Voltage
0-10VDC in 1VDC Steps |
18 Field Configurable Outputs
0-1V to ±10V
0-2mA to 0-20mA
4-20mA |
- Minuteman One-Minute Setup
- I/O LoopTracker LEDs
- Full I/O/Power Isolation
- Internal Bridge Excitation Source
- Drive up to 4 bridges
- Output Test Button
- Uses API-011 11-Pin Socket
- 115 VAC Powered
- A230 option for 230 VAC Power
- D option for 9-30 VDC Power (+$60)
|
Socket Sold Separately
|
API 4059 DIN
Field Selectable Minuteman Setup
Isolated Bridge to DC Transmitter |
Field Configurable
0-5mVDC to
0-400mVDC
Field Settable Excitation Voltage
0-10VDC in 1VDC Steps |
18 Field Configurable Outputs
0-1V to ±10V
0-2mA to 0-20mA
4-20mA |
- Minuteman One-Minute Setup
- I/O LoopTracker LEDs
- Full I/O/Power Isolation
- Internal Bridge Excitation Source
- Drive up to 4 bridges
- Output Test Button
- DIN Rail or Surface Mount
- 55 mm Wide
- 115 VAC Powered
- A230 option for 230 VAC Power
- D option for 9-30 VDC Power (+$60)
|
 |
API SUM-000
Bridge Summing Assembly BoardAPI SUM-025
Field Selectable Minuteman Setup
Bridge Summing Assembly Board with 4059 G, 115VAC powered
API SUM Board Instruction Manual |
Provisions for up to Four 350 Ω or greater Bridges, Strain Gauges or Load Cells
Switch for Internal or External Excitation.
Call Factory for Special Configurations |
11-Pin Socket for
API 4059 G or
API 4058 G |
- Connect up to 4 Bridges
- 4 Trim Pots for Excitation Adjust
- 4 Trim Pots for Signal Adjust
|
 |
| Discontinued Products |
| API 1500 G |
Bridge Input Single Alarm Trip. Call for replacement. |
| API 1520 G |
Bridge Input Dual Alarm Trip. Call for replacement. |
